Driveway area and layer volume
Work out a rectangular area and a theoretical compacted layer volume. Use a depth supplied by your designer or installer; the tool does not choose construction depths.
Assumptions and limits
Area = length × width. Volume = area × depth ÷ 1,000. Rectangular, level geometry only; split an irregular shape into rectangles without overlap and calculate each. Loose volume, compaction, waste, excavation bulking, density and tonnes are excluded.
Your planning result
Driveway planning checklist
Use this to prepare a site discussion before comparing surfaces or ordering materials.
Assumptions and limits
The volume result is not a drainage design, permission decision or material specification. Ground conditions and permeability must be assessed; do not direct runoff onto the highway based on this tool.
Your planning result
Ready to discuss the work?
Use your result as a starting brief, then choose the relevant driveways service. Measurements, condition, access and any permissions still need to be checked for the actual property. Haverhill’s nearby enquiry area crosses administrative boundaries; a tool cannot determine the council or utility responsible for an address.
Planning tools reviewed 17 October 2026. These are information and arithmetic aids, not a professional inspection, design or safety assessment. The independent enquiry service does not book work or guarantee attendance.
Further guidance: Planning Portal: paving a front garden. Checked 17 October 2026.